Carbonara CF tube

Carbonara is a high-endurance, high-quality carbon fiber X beam for Voron and Monolith Gantries using the stock build sizes of 250, 300, and 350.

Key features

• High torsion resistance
• Made with high temperature resin. 110°C short term temperature resistance, good for 90°C chamber.
• Ultra light, up to 58% weight reduction from a standard 2020 aluminum extrusion (before hardware and inserts).
• Smooth 3K carbon strand finish.
• Tested for 800 hours at VERY high speeds, 500-1300mm/s @ 50.000-100.000m/s² and a 80°c chamber. 

Important information

The printed inserts are a MUST  to ensure maximum performance.  For a stock Voron gantry new printed XY-joints are needed that don't have the small tab that aligns with the slot in a regular extrusion. STLs for the inserts and Voron XY-joints can be found here on Printables or purchased here.

Standard Bom Hardware kits can be found here.
BOM for the inserts and mounting can be found here.

Special thanks to

Brazuka: ko-fi
For Making the tube and managing the project.

Adeo: Ko-Fi, Github
For the amazing temperature and torsion testing.
(can be found in the Monolith discord)

CloakedWayne: ko-fi, github
For the incredible mounting inserts.